Rane DJ SEVENTY-TWO Mixer - Cross Fader Disassembly and Adjustment | Rane DJ

Welcome Guest  |  Login  |  Forum Registration

Rane DJ SEVENTY-TWO Mixer - Cross Fader Disassembly and Adjustment

In this video, we take a closer look at the Mag Three, how they work, how to adjust them, disassemble them etc.  

We’ll cover each of the adjustments you can do, both using the mixer settings, and internal to the mixer, including how to adjust the cut in, contour, and tension.

We’ll also disassemble the fader, so you can see how it goes together and works.  This might be helpful to you if you ever need to troubleshoot, lubricate,  replace your fader, replace any of its parts like the carrier, or if you’re just curious about what it looks like under the hood.

Video Contents

  • 33:00 What is new with the MAG THREE faders
  • 51:00 How to adjust fader cut-in
  • 49:00 How to adjust contour, reverse, and deck swap
  • 31:00 How to remove the faceplate to access the faders
  • 21:00 How to adjust the fader tension
  • 58:00 How to remove the faders from the mixer
  • 09:00 How the MAG THREE fader works
  • 51:00 How to lubricate the fader, and what type of lubricant to use
  • 37:00 How to troubleshoot and fix stiff fader due to stuck magnet (method 1)
  • 07:00 How to disassemble the MAG THREE fader itself
  • 09:00 How to troubleshoot and fix stiff fader due to stuck magnet (method 1)
  • 28:00 How to reassemble the fader
  • 36:00 How to reinstall the fader

I've included links below to some other related guides, and links we've mentioned in the video, or in the conversation with viewers in the comments:

 

Where can I get further technical support?

Whether you are a customer or dealer, if you already own a Rane DJ product, or if you just have pre-sales questions, the Rane DJ technical support team is available to help!

Visit the link below to connect with any of the following support options: online community support, phone support, email support.