Rane DJ TWELVE - Vinyl Assembly and Adjusting the Tension
The TWELVE makes it easy to adjust the tension of your vinyl so you can achieve the perfect spin. In this video, we go over how to remove the vinyl on the top, swap out slipmats, and re-attach while setting the platter tension.
Use the 2mm Hex tool to remove the vinyl record by loosening the hex screw on the 45 adapter. This is what attaches the vinyl record to the spindle.
Remove the vinyl record and swap out the slipmat if necessary.
Find the cavity on the side of the spindle and line this up with the screw on the 45 adapter while placing the record back on the spindle. If these are not lined up correctly moving the vinyl will not properly control Serato and/or the vinyl may appear warped or crooked.
Tighten the hex screw enough so that the vinyl can turn with the spindle and move up and down slightly.
If you like a tight response with the platter, press down on the record while tightening the hex screw all the way. If you like a lighter feel, and more backspin, pull up slightly on the record or put no pressure on it while tightening the hex screw.
Further Technical Support
Whether you are a customer or dealer, if you already own a Rane Professional product, or if you just have pre-sales questions, the Rane Professional technical support team is available to help!
Visit the link below to connect with any of the following support options: online community support, phone support, email support.