How-to Setup Rane Hardware With Virtual DJ | Rane DJ

Welcome Guest  |  Login  |  Forum Registration

How-to Setup Rane Hardware With Virtual DJ

 

1. Connect your Rane hardware to the computer
2. Open your MAC preferences and click “Sound”
3. Choose SL-2 / SL-3 / SL-4 / Sixty-Eight / Sixty-One or Sixty-Two by clicking on it and then exit that screen (The TTM57 has different steps to connect and is covered at the end of this article).

 

 

4. Open Virtual Dj and click the “Configure” button in the upper right hand portion of the screen
5. Click the drop down menu next to “Outputs”. Regardless if you are using a 2 channel device like the SL-2 you will still want to select “3 lines mixer”
6. Choose Chan 1&2 : Deck 1 / Chan 3&4 : Deck 2 / Chan 5&6 Samples/Preview and click Apply

 

 

Output connections:

All connections should be made to LINE level inputs on your mixer

 

  • SL2 - Connect Left deck out (deck 1 in software) and Right deck out (deck 2 in software) to your mixer
  • SL3 - Connect Aux out (deck 1 in software) and Left Deck out (deck 2 in software) and Right Deck out (sample player) to your mixer
  • SL4 - Connect Output 1 (deck 1 in software) and 0utput 2 (deck 2 in software) and Output 3 (sample player) to your mixer
  • Sixty-Eight - Set the input selector knob above Channel 1 to USB1(deck one in software), set Channel 2 to USB2 (deck 2 in software) and Channel 3 to USB 3 (sample player)
  • Sixty-One - Set the input selector knob above Channel 1 to USB1(deck one in software), set Channel 2 to USB2 (deck 2 in software) and Channel 3 to USB 3 (sample player)
  • Sixty-Two - Set the input selector knob above Channel 1 to USB1(deck one in software), set Channel 2 to USB2 (deck 2 in software) and Channel 3 to USB 3 (sample player)

 

 

TTM57Set up and Connection:

1. Connect your TTM57 to the computer
2. Open your MAC preferences and click “Sound”
3. Choose “VirtualDj Advanced Audio” and close the screen

 

 

4. Open Virtual Dj and click the “Configure” button in the upper right hand portion of the screen
5. Click the drop down menu next to “Outputs” and select “External Mixer”
6. Select “Deck 1: First card / Deck 2 : Second card”
7. Click the drop down menu next to “Sound Card” and choose “2 cards”
8. Select “TTM57SL Line 1” for the first slot and “TTM57SL Line 2” for the second slot and press “Apply”

 

 

9. The sample player will come out of both channels on the TTM57